Specialty water-treatment chemistry · Since 1995+91 11 2516 1151info@afcl.com
ALBATROSS FINE CHEM · SINCE 1995

Elaborated method for calculating U values

Technical resources

A general expression for U can be easily obtained as follows. Consider a double pipe heat exchanger in which one fluid through the inner pipe and the other fluid through the annular space between space between the two pipes. Let       L          = length of heat exchanger, m ri          = inside radius of inner pipe, m ro          = outside radius of inner pipe, m Ai         = inside surface area of inner pipe (2πriL), m2. Ao        = outside surface area of inner pipe (2πroL), m2. hi          = film coefficient of heat transfer at inside surface of inner pipe, W/m2 C ho         = film coefficient of heat transfer at outside surface of inner pipe, W/m2 C kw        = thermal conductivity of inner pipe wall, W/m C. ti          = temperature of fluid flowing through the inner pipe, C to          = temperature of fluid flowing through the annular space between the two  pipes, C Ri         = thermal resistance of fluid film at the inside surface of inner pipe, m2 C/W Ro        = thermal resistance of fluid film at the outside surface of inner pipe, m2 C/W Rw        = thermal resistance of inner pipe, m2 C/W (i)         The rate of heat transfer between the two fluids is given by: q          = ti - to                        (eq 1.15) ΣR Where              ΣR       = Ri + Ro +Rw               (eq. 1.16) Since                Ri         =   1/Aihi                     (eq. 1.17) Rw        = ln (ro/ri)                     (eq. 1.19) 2πLKw Ro        = 1/Aoho                      (eq. 1.20) Hence q          = .          (ti - to)                           (eq. 1.21) 1/Aihi + ln (ro/ri) + 1/Aoho 2πLKw (ii) If Ui and Uo denote respectively the overall heat transfer coefficient based on unit area of the inside and outside surfaces of the inner pipe, then q          = AiUi (ti - to)  = AoUo (ti - to)        (eq. 1.22) from eq. 1.21 and 1.22  Ui       = .                          1                         (eq. 1.23) 1/hi + Ai ln (ro/ri) + [Ai/Ao]. 1/ho 2πLKw Uo        = .                          1                                  (eq. 1.24) [Ao/Ai].1/hi + [Ao/2πL].ln (ro/ri) + 1/ho Kw (iii) Since Ai = 2πriL and Ao = 2πroL, eq. c and d can also be written as: Ui         = .                          1                             (eq. 1.25) 1/hi + [ri/kw] ln (ro/ri) + [ri/ro]. 1/ho Uo       = .                          1                              (eq. 1.26) [ro/ri].1/hi + [ro/ Kw].ln (ro/ri) +  1/ho