Industrial Heat Transfer & Thermodynamics
Efficient water treatment is founded upon rigorous thermal engineering principles. Explore fundamental equations, diagnostic methodologies, and operational best practices written by AFCL's senior chemical engineers:
1. Heat Exchanger Design & U-Value Calculations
Log Mean Temperature Difference (LMTD) ↗
Derivation and application of LMTD in co-current and counter-current heat exchanger circuits.
Read technical paper ↗ CALCULATION 02L.M.T.D. Correction Factors (F-Factor) ↗
Accounting for multipass shell-and-tube flow geometries and cross-flow temperature departures.
Read technical paper ↗ THERMAL METRIC 03Overall Heat Transfer Coefficient (U-Value) ↗
How scale deposition and fouling resistance (Rf) degrade the fundamental heat exchange rate Q = U·A·ΔTm.
Read technical paper ↗ METHODOLOGY 04Elaborated Method for Calculating U Values ↗
Step-by-step rigorous thermodynamic calculation including tube wall resistance and fouling factors.
Read technical paper ↗ EQUIPMENT 05Types of Industrial Heat Exchangers ↗
Shell-and-tube, plate-and-frame, spiral, and air-cooled heat exchangers: metallurgy and water-side care.
Read technical paper ↗ DIAGNOSTICS 06Designing a Test Heat Exchanger ↗
Building a pilot bypass heat exchanger to evaluate fouling and corrosion rates under live plant conditions.
Read technical paper ↗2. Cooling Tower Thermodynamics & Condenser Performance
Heat Transfer in Cooling Towers ↗
Evaporative and sensible heat rejection dynamics, wet-bulb temperature approach, and range analysis.
Read technical paper ↗ VARIABLES 02Variables Affecting Cooling Tower Performance ↗
Impact of air-to-water ratio (L/G), water distribution uniformity, fill fouling, and drift loss.
Read technical paper ↗ MONITORING 03Checking Steam Condenser Performance ↗
Detecting tube fouling, vacuum degradation, and cooling water temperature rises in turbine surface condensers.
Read technical paper ↗ ANALYSIS 04Condensers with Variable Hot Fluid Temperatures ↗
Calculating mean temperature difference when condensing multi-component vapors or hydrocarbon mixtures.
Read technical paper ↗ HEAT EXCHANGE 05Heat Transfer Within Cooling Heat Exchangers ↗
Boundary layer hydraulics, Reynolds number effects, and the thermodynamics of liquid-liquid cooling.
Read technical paper ↗ HYDRAULICS 06Significance of Flow Rates ↗
Balancing tube velocity: avoiding low-velocity sediment deposition while averting erosion-corrosion.
Read technical paper ↗3. Steam Boilers, Phase Change & Deposit Chemistry
Effect of Scale Formation on Plant Operations ↗
Thermal insulating properties of mineral scales: how 1 mm of calcium sulfate precipitates tube blistering.
Read technical paper ↗ BOILER TYPE 02Scotch Boilers: Operating Chemistry & Maintenance ↗
Firetube Scotch marine boilers: waterside scale prevention, sludge conditioning, and thermal stress control.
Read technical paper ↗ CLASSIFICATION 03Industrial Boiler Classifications ↗
Watertube vs. firetube boilers: operating pressure regimes, water purity thresholds, and blowdown requirements.
Read technical paper ↗ PHASE CHANGE 04Condensation of Steam & Condensate Chemistry ↗
Filmwise vs. dropwise condensation and arresting carbonic acid corrosion via neutralizing amines.
Read technical paper ↗ THERMODYNAMICS 05Combined Heat Transfer Processes ↗
Coupling conduction, convection, and radiation in combustion-side boiler furnaces and economizers.
Read technical paper ↗ FLUID MECHANICS 06Significance of Operating Pressure ↗
Operating pressure impacts on boiling point, dissolved gas solubility, and cavitation damage in pumps.
Read technical paper ↗ REFERENCE 07Common Engineering Conversion Factors ↗
Essential conversion matrices for heat flux, thermal conductivity, flow rates, hardness ppm, and pressure.
Read technical reference ↗ THEORY 08Basic Design Procedure & Heat Exchange Theory ↗
Fundamental heat duty calculation Q = m·Cp·ΔT and sizing heat transfer surface area.
Read technical paper ↗