Specialty water-treatment chemistry · Since 1995+91 11 2516 1151info@afcl.com
ALBATROSS FINE CHEM · SINCE 1995

Significance of flow-rates

Technical resources

Flow-rates and any change in flow-rates have different effects on Q and U values. Following are the effects:
Changes Effects
If hot fluid flow rate is increased     The ΔP of hot fluid across the heat exchanger will increase. The inlet P of hot fluid will increase The ΔT of hot fluid will decrease The ΔT of cold fluid will increase The Q value will increase
If hot fluid flow rate is decreased     Vice-versa of the above effects
If cold fluid flow rate is increased   If cold fluid flow rate is increased     The ΔP of cold fluid across the heat exchanger will increase. The inlet P of cold fluid will increase The ΔT of cold fluid will decrease The ΔT of hot fluid will increase The Q value will increase The fouling/scaling propensity of Cold fluid will decrease The flow induced corrosion/erosion may increase
If cold fluid flow rate is decreased     The ΔP of cold fluid across the heat exchanger will decrease. The inlet P of cold fluid will decrease The ΔT of cold fluid will increase The Q value will decrease The fouling/scaling propensity of Cold fluid will increase Avoid such situations